Data Quality Reports for Session: 109905 User: renata Completed: 01/14/2008

TABLE OF CONTENTS

DQR IDSubjectData Streams Affected
D020717.18TWP/TSI/C3 - Missing data due to Mentor ActivitiestwptsiC3.00, twptsiskycoverC3.a1, twptsiskycoverC3.b1, twptsiskyimageC3.a1
D030130.2TWP/TSI/C3 - Metadata Errors in NetCDF HeadertwptsiskycoverC3.a1, twptsiskycoverC3.b1
D040610.2TWP/TSI/C3 - poor imagestwptsicldmaskC3.a1, twptsiskycoverC3.b1, twptsiskyimageC3.a1
D041014.3TWP/TSI/C3 - camera failuretwptsiskycoverC3.b1, twptsiskyimageC3.a1
D050224.5TWP/TSI/C3 - initial configuration twptsicldmaskC3.a1, twptsiskycoverC3.b1, twptsiskyimageC3.a1
D051114.1TWP/TSI/C3 - Instrument failuretwptsiC3.00, twptsicldmaskC3.a1, twptsimovieC3.a1, twptsiskycoverC3.b1,
twptsiskyimageC3.a1
D060519.2TWP/TSI/C3 - controller board failuretwptsicldmaskC3.a1, twptsimovieC3.a1, twptsiskycoverC3.b1, twptsiskyimageC3.a1


DQRID : D020717.18
Start DateStart TimeEnd DateEnd Time
07/17/2002070507/17/20021805
Subject:
TWP/TSI/C3 - Missing data due to Mentor Activities
DataStreams:twptsiC3.00, twptsiskycoverC3.a1, twptsiskycoverC3.b1, twptsiskyimageC3.a1
Description:
Darwin TSI on-board image collection and processing
had been turned off for Instrument Mentor to make
fine tuning adjustments. Mentor then forgot to turn
the on-board image collection and processing back
on.  All data for this time period is missing and
unrecoverable.
Measurements:twptsiskycoverC3.b1:
  • Pixel count: number total between horizon and processed circle(count.sub.proczen)
  • Pixel count: number total indeterminant(count.unknown)
  • Pixel count: number total in processed circle(count.sky)
  • Pixel count: number thin in zenith circle(region.zenith.count.thin)
  • Dummy altitude for Zeb(alt)
  • Pixel count: number opaque in zenith circle(region.zenith.count.opaque)
  • Pixel count: number below horizon in image(count.sub.horz)
  • base time(base_time)
  • Pixel count: number total opaque(count.opaque)
  • lat(lat)
  • Solar azimuth angle(solar.azimuth)
  • Percentage thin cloud(percent.thin)
  • Sunshine meter(sunny)
  • Pixel count: number thin in sun circle(region.sun.count.thin)
  • Pixel count: number opaque in horizon area(region.horizon.count.opaque)
  • Pixel count: box, outside mirror area(count.box)
  • Sun altitude above horizon(solar.altitude)
  • Pixel count: number thin in horizon area(region.horizon.count.thin)
  • Pixel count: camera and sun strip mask(count.mask)
  • Percent opaque cloud(percent.opaque)
  • lon(lon)
  • Pixel count: number total in horizon area(region.horizon.count)
  • Pixel count: number total in zenith circle(region.zenith.count)
  • Pixel count: number opaque in sun circle(region.sun.count.opaque)
  • Time offset of tweaks from base_time(time_offset)
  • Pixel count: number total thin(count.thin)
  • Pixel count: number total in sun circle(region.sun.count)
  • Relative \'strength\' of direct sun(sun.strength)
twptsiskyimageC3.a1:
  • JPG data stream - documentation not supported(JPEG data stream - documentation not yet available)
twptsiskycoverC3.a1:
  • Pixel count: number total between horizon and processed circle(count.sub.proczen)
  • Pixel count: number total in zenith circle(region.zenith.count)
  • Pixel count: number opaque in sun circle(region.sun.count.opaque)
  • lon(lon)
  • Sunshine meter(sunny)
  • Pixel count: number total opaque(count.opaque)
  • Pixel count: number total in horizon area(region.horizon.count)
  • Pixel count: number thin in zenith circle(region.zenith.count.thin)
  • Pixel count: number total thin(count.thin)
  • Pixel count: camera and sun strip mask(count.mask)
  • Pixel count: number opaque in zenith circle(region.zenith.count.opaque)
  • Pixel count: number total in sun circle(region.sun.count)
  • Relative \'strength\' of direct sun(sun.strength)
  • Solar azimuth angle(solar.azimuth)
  • Pixel count: number thin in sun circle(region.sun.count.thin)
  • Percentage thin cloud(percent.thin)
  • Pixel count: number below horizon in image(count.sub.horz)
  • Time offset of tweaks from base_time(time_offset)
  • Pixel count: box, outside mirror area(count.box)
  • Pixel count: number opaque in horizon area(region.horizon.count.opaque)
  • Sun altitude above horizon(solar.altitude)
  • Percent opaque cloud(percent.opaque)
  • Pixel count: number thin in horizon area(region.horizon.count.thin)
  • Pixel count: number total in processed circle(count.sky)
  • base time(base_time)
  • Pixel count: number total indeterminant(count.unknown)
  • Dummy altitude for Zeb(alt)
  • lat(lat)
twptsiC3.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

Back To Table of Contents

DQRID : D030130.2
Start DateStart TimeEnd DateEnd Time
07/16/2002000001/20/20032359
Subject:
TWP/TSI/C3 - Metadata Errors in NetCDF Header
DataStreams:twptsiskycoverC3.a1, twptsiskycoverC3.b1
Description:
The value of "sample_int" reported in the netCDF header is
incorrect.  The correct sampling interval is 30 seconds.

The maximum values for the variable "sunny" is incorrect.  
It should be 1, not 100 as documented in the netCDF header. 
Users should disregard the "qc_sunny" flag during this
period of time and apply their own qc check if desired.

The minimum value for the variable "solar.altitude" is
incorrect. It should be -90, not 10 as documented in the
netCDF header.  Users should disregard the "qc_solar.altitude"
flag during this period of time and apply their own qc check
if desired.
Measurements:twptsiskycoverC3.b1:
  • Time offset of tweaks from base_time(time_offset)
  • Sun altitude above horizon(solar.altitude)
  • Sunshine meter(sunny)
twptsiskycoverC3.a1:
  • Time offset of tweaks from base_time(time_offset)

Back To Table of Contents

DQRID : D040610.2
Start DateStart TimeEnd DateEnd Time
06/03/2004113506/10/20042318
Subject:
TWP/TSI/C3 - poor images
DataStreams:twptsicldmaskC3.a1, twptsiskycoverC3.b1, twptsiskyimageC3.a1
Description:
The resolution of TSI images were very poor and the colors were wrong.  The clear sky 
appeared a reddish-brown during the day causing the processed image to be 100% opaque. The 
problem was corrected when the instrument was power cycled.
Measurements:twptsiskycoverC3.b1:
  • Pixel count: number opaque in horizon area(region.horizon.count.opaque)
  • Pixel count: number total between horizon and processed circle(count.sub.proczen)
  • Pixel count: number total indeterminant(count.unknown)
  • Pixel count: number total opaque(count.opaque)
  • Pixel count: box, outside mirror area(count.box)
  • Percent opaque cloud(percent.opaque)
  • Pixel count: number total in horizon area(region.horizon.count)
  • Pixel count: number total in processed circle(count.sky)
  • Pixel count: number opaque in sun circle(region.sun.count.opaque)
  • Pixel count: number total in zenith circle(region.zenith.count)
  • Pixel count: number thin in zenith circle(region.zenith.count.thin)
  • Pixel count: number total thin(count.thin)
  • Pixel count: number thin in horizon area(region.horizon.count.thin)
  • Sunshine meter(sunny)
  • Percentage thin cloud(percent.thin)
  • Pixel count: camera and sun strip mask(count.mask)
  • Pixel count: number total in sun circle(region.sun.count)
  • Pixel count: number opaque in zenith circle(region.zenith.count.opaque)
  • Relative \'strength\' of direct sun(sun.strength)
  • Pixel count: number below horizon in image(count.sub.horz)
  • Pixel count: number thin in sun circle(region.sun.count.thin)
twptsicldmaskC3.a1:
  • PNG data stream - documentation not supported(png)
twptsiskyimageC3.a1:
  • JPG data stream - documentation not supported(JPEG data stream - documentation not yet available)

Back To Table of Contents

DQRID : D041014.3
Start DateStart TimeEnd DateEnd Time
10/14/2004205511/09/20041146
Subject:
TWP/TSI/C3 - camera failure
DataStreams:twptsiskycoverC3.b1, twptsiskyimageC3.a1
Description:
The TSI image was out of focus due to condensation on the camera lens and PC board that 
led to camera failure. The problem was corrected by replacing the camera with a spare and 
adjusting the shadowband.
Measurements:twptsiskycoverC3.b1:
  • Pixel count: number opaque in horizon area(region.horizon.count.opaque)
  • Pixel count: number total between horizon and processed circle(count.sub.proczen)
  • Pixel count: number total indeterminant(count.unknown)
  • Pixel count: number total opaque(count.opaque)
  • Pixel count: box, outside mirror area(count.box)
  • Percent opaque cloud(percent.opaque)
  • Pixel count: number total in processed circle(count.sky)
  • Pixel count: number total in horizon area(region.horizon.count)
  • Pixel count: number opaque in sun circle(region.sun.count.opaque)
  • Pixel count: number total in zenith circle(region.zenith.count)
  • Pixel count: number thin in zenith circle(region.zenith.count.thin)
  • Pixel count: number total thin(count.thin)
  • Pixel count: number thin in horizon area(region.horizon.count.thin)
  • Percentage thin cloud(percent.thin)
  • Pixel count: camera and sun strip mask(count.mask)
  • Pixel count: number total in sun circle(region.sun.count)
  • Pixel count: number opaque in zenith circle(region.zenith.count.opaque)
  • Pixel count: number below horizon in image(count.sub.horz)
  • Pixel count: number thin in sun circle(region.sun.count.thin)
twptsiskyimageC3.a1:
  • JPG data stream - documentation not supported(JPEG data stream - documentation not yet available)

Back To Table of Contents

DQRID : D050224.5
Start DateStart TimeEnd DateEnd Time
02/03/2005024002/10/20052238
Subject:
TWP/TSI/C3  - initial configuration
DataStreams:twptsicldmaskC3.a1, twptsiskycoverC3.b1, twptsiskyimageC3.a1
Description:
When the TSI-660 was deployed, there were several days of initial adjustments to the 
shadowband alignment and sky filter.
Measurements:twptsiskycoverC3.b1:
  • Pixel count: number opaque in horizon area(region.horizon.count.opaque)
  • Pixel count: number total between horizon and processed circle(count.sub.proczen)
  • Pixel count: number total indeterminant(count.unknown)
  • Pixel count: box, outside mirror area(count.box)
  • Sun altitude above horizon(solar.altitude)
  • Pixel count: number total in processed circle(count.sky)
  • Pixel count: number thin in zenith circle(region.zenith.count.thin)
  • Dummy altitude for Zeb(alt)
  • Pixel count: number thin in horizon area(region.horizon.count.thin)
  • Pixel count: camera and sun strip mask(count.mask)
  • Pixel count: number opaque in zenith circle(region.zenith.count.opaque)
  • Pixel count: number below horizon in image(count.sub.horz)
  • base time(base_time)
  • Pixel count: number total opaque(count.opaque)
  • Percent opaque cloud(percent.opaque)
  • lon(lon)
  • lat(lat)
  • Pixel count: number total in horizon area(region.horizon.count)
  • Pixel count: number total in zenith circle(region.zenith.count)
  • Pixel count: number opaque in sun circle(region.sun.count.opaque)
  • Solar azimuth angle(solar.azimuth)
  • Time offset of tweaks from base_time(time_offset)
  • Pixel count: number total thin(count.thin)
  • Percentage thin cloud(percent.thin)
  • Sunshine meter(sunny)
  • Pixel count: number total in sun circle(region.sun.count)
  • Relative \'strength\' of direct sun(sun.strength)
  • Pixel count: number thin in sun circle(region.sun.count.thin)
twptsicldmaskC3.a1:
  • PNG data stream - documentation not supported(png)
twptsiskyimageC3.a1:
  • JPG data stream - documentation not supported(JPEG data stream - documentation not yet available)

Back To Table of Contents

DQRID : D051114.1
Start DateStart TimeEnd DateEnd Time
11/14/2005045312/19/20050300
Subject:
TWP/TSI/C3 - Instrument failure
DataStreams:twptsiC3.00, twptsicldmaskC3.a1, twptsimovieC3.a1, twptsiskycoverC3.b1,
twptsiskyimageC3.a1
Description:
The TSI failed due to a lightning strike. Several parts were replaced, modified, or 
bypassed and the system was restarted.
Measurements:twptsiskycoverC3.b1:
  • Pixel count: number opaque in horizon area(region.horizon.count.opaque)
  • Pixel count: number total between horizon and processed circle(count.sub.proczen)
  • Pixel count: number total indeterminant(count.unknown)
  • Pixel count: box, outside mirror area(count.box)
  • Sun altitude above horizon(solar.altitude)
  • Pixel count: number total in processed circle(count.sky)
  • Pixel count: number thin in zenith circle(region.zenith.count.thin)
  • Dummy altitude for Zeb(alt)
  • Pixel count: number thin in horizon area(region.horizon.count.thin)
  • Pixel count: camera and sun strip mask(count.mask)
  • Pixel count: number opaque in zenith circle(region.zenith.count.opaque)
  • Pixel count: number below horizon in image(count.sub.horz)
  • base time(base_time)
  • Pixel count: number total opaque(count.opaque)
  • Percent opaque cloud(percent.opaque)
  • lon(lon)
  • lat(lat)
  • Pixel count: number total in horizon area(region.horizon.count)
  • Pixel count: number total in zenith circle(region.zenith.count)
  • Pixel count: number opaque in sun circle(region.sun.count.opaque)
  • Solar azimuth angle(solar.azimuth)
  • Time offset of tweaks from base_time(time_offset)
  • Pixel count: number total thin(count.thin)
  • Percentage thin cloud(percent.thin)
  • Sunshine meter(sunny)
  • Pixel count: number total in sun circle(region.sun.count)
  • Relative \'strength\' of direct sun(sun.strength)
  • Pixel count: number thin in sun circle(region.sun.count.thin)
twptsicldmaskC3.a1:
  • PNG data stream - documentation not supported(png)
twptsimovieC3.a1:
  • (MPEG data stream - documentation not yet available)
twptsiskyimageC3.a1:
  • JPG data stream - documentation not supported(JPEG data stream - documentation not yet available)
twptsiC3.00:
  • Raw data stream - documentation not supported(Raw data stream - documentation not supported)

Back To Table of Contents

DQRID : D060519.2
Start DateStart TimeEnd DateEnd Time
05/18/2006043508/02/20060230
Subject:
TWP/TSI/C3 - controller board failure
DataStreams:twptsicldmaskC3.a1, twptsimovieC3.a1, twptsiskycoverC3.b1, twptsiskyimageC3.a1
Description:
The mirror control board failed and was replaced with a spare. Several images were 
collected in the iterim that should be ignored. These images include periods when the sun was 
not masked by the shadowband, the camera lens was covered by red tape to protect the CCD 
from direct exposure to the sun and, the instrument was inside the shop for repair and 
testing.
Measurements:twptsiskycoverC3.b1:
  • Pixel count: number opaque in horizon area(region.horizon.count.opaque)
  • Pixel count: number total between horizon and processed circle(count.sub.proczen)
  • Pixel count: number total indeterminant(count.unknown)
  • Pixel count: box, outside mirror area(count.box)
  • Sun altitude above horizon(solar.altitude)
  • Pixel count: number total in processed circle(count.sky)
  • Pixel count: number thin in zenith circle(region.zenith.count.thin)
  • Dummy altitude for Zeb(alt)
  • Pixel count: number thin in horizon area(region.horizon.count.thin)
  • Pixel count: camera and sun strip mask(count.mask)
  • Pixel count: number opaque in zenith circle(region.zenith.count.opaque)
  • Pixel count: number below horizon in image(count.sub.horz)
  • base time(base_time)
  • Pixel count: number total opaque(count.opaque)
  • Percent opaque cloud(percent.opaque)
  • lon(lon)
  • lat(lat)
  • Pixel count: number total in horizon area(region.horizon.count)
  • Pixel count: number total in zenith circle(region.zenith.count)
  • Pixel count: number opaque in sun circle(region.sun.count.opaque)
  • Solar azimuth angle(solar.azimuth)
  • Time offset of tweaks from base_time(time_offset)
  • Pixel count: number total thin(count.thin)
  • Percentage thin cloud(percent.thin)
  • Sunshine meter(sunny)
  • Pixel count: number total in sun circle(region.sun.count)
  • Relative \'strength\' of direct sun(sun.strength)
  • Pixel count: number thin in sun circle(region.sun.count.thin)
twptsicldmaskC3.a1:
  • PNG data stream - documentation not supported(png)
twptsimovieC3.a1:
  • (MPEG data stream - documentation not yet available)
twptsiskyimageC3.a1:
  • JPG data stream - documentation not supported(JPEG data stream - documentation not yet available)

Back To Table of Contents


END OF DATA