MAO/PSAP/S1 - Operator reset of transmittance glitch

Appears that the Operator changed filter @ 03:15 and did not reset transmission until 
04:15. Then there was another transmittance discontinuity at 05:20. All data should be 
considered incorrect.

Do not use data

• AOS PSAP3W transmittance, green channel(TrG)
• AOS PSAP3W mass flow, mV(mass_flow_voltage)
• AOS PSAP3W transmittance, green channel(transmittance_G)
• Aerosol light absorption coefficient, nominal red wavelength at dry or reference
  RH(Ba_R_PSAP3W)
• Diffusion flow valve position(dilution_flow_valve_position)
• AOS PSAP3W flags(psap_flags)
• Aerosol light absorption coefficient, nominal green wavelength at dry or
  reference RH(Ba_G_PSAP3W)
• AOS Ba_B_CLAP3W transmittance, blue channel(transmittance_B)
• AOS PSAP3W transmittance, blue channel(TrB)
• Aerosol light absorption coefficient, nominal blue wavelength at dry or
  reference RH(Ba_B_PSAP3W)
• Flow setpoint(dilution_flow_setpoint)
• Dilution flow rate(dilution_flow)
• Impactor setting in terms of aerodynamic diameter cut off(impactor_setting)
• Averaging time interval(averaging_time)
• Mass flow(mass_flow)
• AOS Ba_R_CLAP3W transmittance, red channel(transmittance_R)
• AOS PSAP3W transmittance, red channel(TrR)