NSA/C1 - Site-wide power failure

The Barrow facility experienced a site-wide power failure on 12/13.  Power was restored to 
most instruments between 2250 and 2330 GMT.

Data are missing and unrecoverable

• Number of pulse code bits(pcbits)
• lon(lon)
• base time in epoch(base_time)
• Number of Coherent Samples/Spectral Point(ncoh)
• Pulse length(plen)
• Beam Number(beam)
• Time Domain Integration Time(tditime)
• Individual Spectrum Integration Time(sitime)
• Mean atmospheric vertical velocity(mdf)
• Signal-to-noise-ratio(snr)
• Vertical FFT Bandwidth(vband)
• Height Index(range_gate)
• Array of heights for each sample time(height_t)
• Delay Time to 1st Gate(dly)
• Time offset from base_time(time_offset)
• Sample Rate(sampr)
• Rx Bandwidth Switch Code(bswitch)
• Number of Individual Spectra/Average Spectrum(nspc)
• Oblique FFT bandwidth(oband)
• Interpulse period(ipp)
• 1000 * log10(noise signal level)(noise)
• Beam Elevation Angle(elevation)
• -180.0 - +180.0(alt)
• Spectral Width: vert velocity(specw)
• North Latitude(lat)
• Radial Velocity Spectral Resolution(vsr)
• Number of Valid Heights(nheight)
• Height of Center of First Range Gate(rgf)
• Ave Time per Average Spectra. Also known as dwell.(spcavetime)
• Range gate spacing(rgs)
• Height of center of last range gate(rgl)
• Pulse repetition frequency(prf)

• Receiver Cal Check Time Stamp(CalCheckTime)
• Reflectivity(Reflectivity)
• DC Filtering ON-OFF Status(DCFilterONOFF)
• Receiver Gain(RxGain)
• Delay to First Range Gate(StartGateDelay)
• Number of Coherent Integrations(NumCoherentIntegrations)
• Receiver Sky Noise(SkyNoiseLevel)
• Receiver Mode(ReceiverMode)
• Peak tranmitted power, averaged over the course of the hour(PeakTransmittedPowerAvg)
• Time offset from base_time(time_offset)
• time_in_seconds_since_volume_start(time)
• Minimum detectable reflectivity(MinimumDetectableReflectivity)
• Receiver Cal Check Level(CalCheckLevel)
• Gate Spacing(GateSpacing)
• Number of Spectral Averages(NumSpectralAverages)
• Time associated with hourly averaged values(TimeAvg)
• base time in epoch(base_time)
• Current Receiver Number(ReceiverNumber)
• Range Heights (center of radar sample volume)(heights)
• Range Corrected Calibrated Power(RangeCorrectedPower)
• Max. height of clutter removal(ClutterHeight)
• Inter-Pulse Period(InterPulsePeriod)
• RadarWaveLength(m) / [4 * InterPulsePeriod(s) * NumCoherentIntegrations](NyquistVelocity)
• Receiver Cal Time Stamp(RxCalTimeStamp)
• Number of Code Bits(NumCodeBits)
• Operating Set for this Record(ModeNum)
• Radar Constant(RadarConstant)
• Mean Noise Level(NoiseLevel)
• Average Noise Level (S/N<0)(AvgNoiseLevel)
• TWT Status Code, details forthcoming from MMCR vendor(TWTStatusCode)
• lon(lon)
• Number of Receiver(NumReceivers)
• MMCR Mean Doppler Velocity(MeanDopplerVelocity)
• Circular Depolarization Ratio(CircularDepolarizationRatio)
• Pulse Width(PulseWidth)
• Windowing ON-OFF Status(WindowingONOFF)
• Power (uncalibrated)(Power)
• Signal to Noise Ratio(SignalToNoiseRatio)
• Data Quality Status(DataQualityStatus)
• Number of Points in FFT(NumFFT)
• Receiver 290K Level(Rx290KLevel)
• Number of Range Gates(NumHeights)
• -180.0 - +180.0(alt)
• North Latitude(lat)
• radar mode char identifier(ModeDescription)
• MMCR Spectral Width(SpectralWidth)

• Present Weather Sensor Alarm(PWSAlarm)
• Chilled Mirror Calculated Relative Humidity(CMHRH)
• Standard Deviation of 10m Calculated Vapor Pressure(VP10M_STD)
• 40m Average Calculated Vapor Pressure(VP40M_AVG)
• 2m Average Calculated Dew Point(DP2M_AVG)
• 40m Average Temperature(T40M_AVG)
• Average Y Component of Sonic Wind Speed(SonicY_AVG)
• Standard Deviation of 40m Relative Humidity(RH40M_STD)
• 20m Average Relative Humidity(RH20M_AVG)
• 10m Vector Averaged Wind Direction(WD10M_DU_WVT)
• 2m Average Temperature(T2M_AVG)
• Standard Deviation of 2m Vector Averaged Wind Direction(WD2M_SDU_WVT)
• Sonic Arithmetic Mean Wind Speed(SonicWS_S_WVT)
• 10m Average QLI Reference Temperature(RefT10m_AVG)
• 2m Average QLI Input Voltage(Volt2M_AVG)
• base time in epoch(base_time)
• Chilled Mirror Calculated Saturation Vapor Pressure(SatVPCMH)
• Cumulative Snow Sum(CumSnow)
• Sonic Vector Averaged Wind Speed(SonicWS_U_WVT)
• Cumulative Water Sum(CumH2O)
• 40m Average Calculated Dew Point(DP40M_AVG)
• Standard Deviation of 2m Relative Humidity(RH2M_STD)
• -180.0 - +180.0(alt)
• North Latitude(lat)
• lon(lon)
• Chilled Mirror Dew Point(CMHDP)
• 40m Vector Averaged Wind Speed(WS40M_U_WVT)
• 40m Vector Averaged Wind Direction(WD40M_DU_WVT)
• Instant Present Weather Code(InstPwCod)
• 20m Arithmetic Mean Wind Speed(WS20M_S_WVT)
• Standard Deviation of 40m Calculated Dew Point(DP40M_STD)
• 20m Average Calculated Vapor Pressure(VP20M_AVG)
• 20m Average QLI Reference Temperature(RefT20M_AVG)
• Datalogger Battery Voltage(Batt_Volt)
• Standard Deviation of 40m Vector Averaged Wind Direction(WD40M_SDU_WVT)
• Standard Deviation of 10m Relative Humidity(RH10M_STD)
• Standard Deviation of 20m Calculated Dew Point(DP20M_STD)
• Standard Deviation of 10m Calculated Dew Point(DP10M_STD)
• Average X Component of Sonic Wind Speed(SonicX_AVG)
• 40m Arithmetic Mean Wind Speed(WS40M_S_WVT)
• Standard Deviation of 20m Vector Averaged Wind Direction(WD20M_SDU_WVT)
• 10m Average QLI Input Voltage(Volt10M_AVG)
• 40m Average QLI Reference Voltage(Volt40M_AVG)
• 20m Average Temperature(T20M_AVG)
• 10m Average Calculated Vapor Pressure(VP10M_AVG)
• 20m Average QLI Input Voltage(Volt20M_AVG)
• 10m Average Temperature(T10M_AVG)
• Precipitation Rate(PcpRate)
• 40m Average QLI Reference Temperature(RefT40M_AVG)
• 20m Vector Averaged Wind Speed(WS20M_U_WVT)
• 2m Vector Averaged Wind Direction(WD2M_DU_WVT)
• 2m Arithmetic Mean Wind Speed(WS2M_S_WVT)
• Average Sonic Static Speed of Sound(SonicS_AVG)
• Standard Deviation of 20m Relative Humidity(RH20M_STD)
• Chilled Mirror Temperature(CMHTemp)
• 20m Vector Averaged Wind Direction(WD20M_DU_WVT)
• Wind direction vector mean standard deviation(SonicWD_SDU_WVT)
• 2m Average Relative Humidity(RH2M_AVG)
• Standard Deviation of 2m Calculated Dew Point(DP2M_STD)
• 10m Average Calculated Dew Point(DP10M_AVG)
• Standard Deviation of 10m Vector Averaged Wind Direction(WD10M_SDU_WVT)
• 1 hour Present Weather Code(PwCod1hr)
• 2m Vector Averaged Wind Speed(WS2M_U_WVT)
• 40m Average Relative Humidity(RH40M_AVG)
• Standard Deviation of 2m Calculated Vapor Pressure(VP2M_STD)
• Standard Deviation of 2m Temperature(T2M_STD)
• 10m Arithmetic Mean Wind Speed(WS10M_S_WVT)
• 15 minute Present Weather Code(PwCod15mi)
• 20m Average Calculated Dew Point(DP20M_AVG)
• Sonic Vector Averaged Wind Direction(SonicWD_DU_WVT)
• 1 minute Average Visibility(AvgVis1mi)
• Atmospheric Pressure(AtmPress)
• 10 minute Average Visibility(AvgVis10m)
• 2m Average QLI Reference Temperature(RefT2M_AVG)
• 10m Vector Averaged Wind Speed(WS10M_U_WVT)
• 2m Average Calculated Vapor Pressure(VP2M_AVG)
• 10m Average Relative Humidity(RH10M_AVG)
• Standard Deviation of 20m Temperature(T20M_STD)
• Standard Deviation of 10m Temperature(T10M_STD)
• Standard Deviation of 20m Calculated Vapor Pressure(VP20M_STD)
• Time offset from base_time(time_offset)
• Chilled Mirror Calculated Vapor Pressure(VPCMH)
• Standard Deviation of 40m Temperature(T40M_STD)
• Standard Deviation of 40m Calculated Vapor Pressure(VP40M_STD)
• time_in_seconds_since_volume_start(time)

• Ambient temperature used in calibration(calibrationAmbientTemp)
• Relative humidity measured near Blackbodies. Use with air temperature near BBs
  only.(atmosphericRelativeHumidity)
• Ambient air temperature at hatch opening(outsideAirTemp)
• Hot blackbody temperature used in calibration(calibrationHBBtemp)
• Observation date(dateYYMMDD)
• lon(lon)
• wavenumbers for mean radiance spectra(wnum)
• Difference between the sky view\'s radiance variance and the hot black body
  view\'s variance(standard_dev_mean_rad)
• Julian Day including day and fraction of day(JulianDay)
• base time in epoch(base_time)
• Wave number in reciprocal centimeters(wnum2)
• Scene mirror view angle in non-negative degrees, measured clockwise from nadir
  looking into interferometer window(sceneMirrorAngle)
• time_in_seconds_since_volume_start(time)
• Observation altitude(Altitude)
• Time offset from base_time(time_offset)
• Maximum departure from ideal of the mirror position over the course of all
  contributing views. Typically two hot, two ambient, and one scene view are
  examine(sceneMirPosEncoderMaxDrift)
• Observation longitude(Longitude)
• Observation atmospheric pressure in AERI electronics(atmosphericPressure)
• Observation latitude(Latitude)
• Logical flag indicating that a data record is missing (true/false)(missingDataFlag)
• Time in decimal format at center of AERI sky observation period(Time_UTC_hours)
• Character string containing instrument name(instrumentUnitNumber)
• AERI instrument unit serial number(AERIunitNumber)
• Calibrated scene type identification(calibratedSceneID)
• Mean of radiance spectra ensemble(mean_rad)
• Duration of scene view(sceneViewDuration)
• BB Support Structure Temperature(BBsupportStructureTemp)
• Version number of Operational Software(systemReleaseNumber)
• -180.0 - +180.0(alt)
• AERI instrument data channel number(channelNumber)
• Boolean with negative error conditions: 1:Open 0:Closed -1:Fault -2:Outside
  Valid Range -3:Neither Open Nor Closed(hatchOpen)
• North Latitude(lat)
• Time at center of AERI sky observation period(timeHHMMSS)
• Cold blackbody temperature used in calibration(calibrationCBBtemp)

• Temperature correction coefficient at 31.4 GHz(tc31)
• Temperature correction coefficient at 23.8 GHz(tc23)
• IR Brightness Temperature(ir_temp)
• 31.4 GHz sky signal(sky31)
• 23.8 GHz blackbody+noise injection signal(bbn23)
• 23.8 GHz sky signal(sky23)
• base time in epoch(base_time)
• 31.4 GHz blac2body+noise injection signal(bbn31)
• Noise injection temp at 23.8 GHz adjusted to tkbb(tnd23)
• Noise injection temp at 31.4 GHz adjusted to tkbb(tnd31)
• Time offset from base_time(time_offset)
• Mean 23.8 GHz sky brightness temperature(tbsky23)
• Noise injection temp at nominal temperature at 31.4 GHz(tnd_nom31)
• Mixer kinetic (physical) temperature(tkxc)
• Noise injection temp at nominal temperature at 23.8 GHz(tnd_nom23)
• Mean 31.4 GHz sky brightness temperature(tbsky31)
• (tknd)
• Total water vapor along LOS path(vap)
• 23.8 GHz Blackbody signal(bb23)
• 31.4 GHz blackbody(bb31)
• Water on Teflon window (1=WET, 0=DRY)(wet_window)
• Actual elevation angle(actel)
• Ambient temperature(tkair)
• North Latitude(lat)
• -180.0 - +180.0(alt)
• Blackbody kinetic temperature(tkbb)
• Actual Azimuth(actaz)
• Averaged total liquid water along LOS path(liq)
• Sky Infra-Red Temperature(sky_ir_temp)
• lon(lon)

• Observation longitude(Longitude)
• AERI SW scene radiance spectral averages (ch2)(SkyRadianceSpectralAveragesCh2)
• AERI LW Scene Radiance Spectral Averages (Ch1)(SkyRadianceSpectralAveragesCh1)
• Cold blackbody temperature used in calibration(calibrationCBBtemp)
• AERI instrument unit serial number(AERIunitNumber)
• Longwave radiance average (700_705 cm^-1) elevated air(elevatedLayerRadiance700_705)
• Observation atmospheric pressure in AERI electronics(atmosphericPressure)
• Radiance standard deviation during sky view averaged over (700_705 cm-1)(skyViewStdDevRadiance700_705)
• AERI instrument data channel number(channelNumber)
• The maximum excursion of hot-blackbody temperature over 5 consecutive scenes,
  centered on the scene view(HBBtempDrift)
• Averaged Wave number in inverse centimeters(wnumsum8)
• Averaged Wave number in inverse centimeters(wnumsum9)
• Averaged wave number for SW scene NESR spectral averages (ch2)(wnumsum6)
• Averaged wave number for LW HBB 2min NESR estimate number 1 (ch1)(wnumsum7)
• Averaged Wave number in inverse centimeters(wnumsum4)
• Wave number in reciprocal centimeters(wnumsum5)
• Averaged wave number for SW responsivity spectral averages(wnumsum2)
• Averaged Wave number in inverse centimeters(wnumsum3)
• Averaged wave number for LW responsivity spectral averages(wnumsum1)
• Maximum temperature difference between HBB thermistors(HBBmaxTempDiff)
• The noise equivalent radiance observed in the shortwave channel during a sky
  view at 2500 cm^-1(SWskyNEN)
• Longwave radiance average (675-680 cm-1) Surface Air(surfaceLayerRadiance675_680)
• Maximum departure from ideal of the mirror position over the course of all
  contributing views. Typically two hot, two ambient, and one scene view are
  examine(sceneMirPosEncoderMaxDrift)
• Hot blackbody temperature used in calibration(calibrationHBBtemp)
• Shortwave radiance average (2282_2287 cm^-1) elevated air(elevatedLayerRadiance2282_2287)
• Shortwave window brightness temperature from radiance average (2510_2515 cm-1)(shortwaveWindowAirTemp2510_2515)
• Shortwave elevated air brightness temperature from radiance average (2282_2287
  cm-1)(elevatedLayerAirTemp2282_2287)
• Observation date(dateYYMMDD)
• Shortwave radiance average (2295_2300 cm^-1) Surface Air(surfaceLayerRadiance2295_2300)
• AERI SW Scene Variability Spectral Averages (Ch2)(SkyUniformityCh2)
• AERI LW Scene Variability Spectral Averages (Ch1)(SkyUniformityCh1)
• Duration of scene view(sceneViewDuration)
• Longwave window brightness temperature from radiance average (985_990 cm^-1)(longwaveWindowAirTemp985_990)
• Logical flag indicating that a data record is missing (true/false)(missingDataFlag)
• AERI SW HBB 2min NESR estimate #2 derived from sequential HBB views (ch2)(HBB2minNENestimateNo2Ch2)
• AERI LW HBB 2min NESR estimate #2 derived from sequential HBB views (ch1)(HBB2minNENestimateNo2Ch1)
• Rain sensor analog output(rainSensorIntensity)
• Shortwave surface air brightness temperature from radiance average (2295_2300
  cm-1)(surfaceLayerAirTemp2295_2300)
• Time at center of AERI sky observation period(timeHHMMSS)
• Radiance standard deviation during sky view averaged over (675_680 cm-1)(skyViewStdDevRadiance675_680)
• Radiance standard deviation during sky view averaged over (2282_2287 cm-1)(skyViewStdDevRadiance2282_2287)
• Characteristic value representing overall longwave channel responsivity(LWresponsivity)
• Julian Day including day and fraction of day(JulianDay)
• Logical flag indicating whether longwave channel noise equivalent radiance is
  acceptable in sky view (true/false). Determined using LWskyNEN and
  LWskyNENlimit.(LWskyNENacceptable)
• AERI SW Responsivity Spectral Averages (Ch2)(ResponsivitySpectralAveragesCh2)
• AERI LW responsivity spectral averages (ch1)(ResponsivitySpectralAveragesCh1)
• Time offset from base_time(time_offset)
• Scene mirror view angle in non-negative degrees, measured clockwise from nadir
  looking into interferometer window(sceneMirrorAngle)
• Ambient temperature used in calibration(calibrationAmbientTemp)
• North Latitude(lat)
• Maximum Standard Deviation in Thermistor Channels 0..7(maxSampleStdDev)
• -180.0 - +180.0(alt)
• Observation altitude(Altitude)
• The noise equivalent radiance observed in the longwave channel during a sky view
  at 1000 cm-1(LWskyNEN)
• Sun sensor intensity(sunSensorIntensity)
• Shortwave HBB Noise-equivalent Radiance(SW_HBB_NEN)
• Shortwave window radiance average (2510_2515 cm^-1)(shortwaveWindowRadiance2510_2515)
• AERI SW Scene NESR Spectral Averages (Ch2)(SkyNENCh2)
• AERI LW scene NESR spectral averages (ch1)(SkyNENCh1)
• Longwave surface air brightness temperature from radiance average (675_680 cm-1)(surfaceLayerAirTemp675_680)
• Character string containing instrument name(instrumentUnitNumber)
• Maximum temperature difference between ABB thermistors(ABBmaxTempDiff)
• Observation latitude(Latitude)
• Version number of Operational Software(systemReleaseNumber)
• Radiance standard deviation during sky view averaged over (985_990 cm^-1)(skyViewStdDevRadiance985_990)
• Difference between actual and ideal motor encoder values for current view
  indicative of quality of the mirror positioning.(sceneMirPosEncoderDrift)
• Longwave elevated air brightness temperature from radiance average (700_705
  cm-1)(elevatedLayerAirTemp700_705)
• Boolean with negative error conditions: 1:Open 0:Closed -1:Fault -2:Outside
  Valid Range -3:Neither Open Nor Closed(hatchOpen)
• Characteristic value representing overall shortwave channel responsivity(SWresponsivity)
• Longwave window radiance average (985_990 cm^-1)(longwaveWindowRadiance985_990)
• Radiance standard deviation during sky view averaged over (2295_2300 cm^-1)(skyViewStdDevRadiance2295_2300)
• base time in epoch(base_time)
• Calibrated scene type identification(calibratedSceneID)
• Front end fan air temperature difference(frontEndFanAirTempDiff)
• Averaged wave number for SW scene radiance spectral averages (ch2)(wnumsum12)
• Wave number in reciprocal centimeters(wnumsum11)
• Averaged wave number for SW scene brightness temp spectral averages (ch2)(wnumsum14)
• Averaged Wave number in inverse centimeters(wnumsum13)
• Logical flag indicating whether any data is available at current time
  (true/false)(dataAvailable)
• Longwave HBB noise-equivalent radiance(LW_HBB_NEN)
• lon(lon)
• Averaged wave number for SW HBB 2min NESR estimate number 2 (ch2)(wnumsum10)
• AERI LW scene brightness temp spectral averages (ch1)(SkyBrightnessTempSpectralAveragesCh1)
• AERI SW scene brightness temp spectral averages (ch2)(SkyBrightnessTempSpectralAveragesCh2)
• time_in_seconds_since_volume_start(time)
• Logical flag indicating whether shortwave channel noise equivalent radiance is
  acceptable in sky view (true/false). Determined using SWskyNEN and
  SWskyNENlimit.(SWskyNENacceptable)
• Logical flag indicating whether HBB temperature is stable (true) or not stable
  (false). Determined using HBBtempDrift and HBBtempDriftLimit.(HBBstable)
• Time in decimal format at center of AERI sky observation period(Time_UTC_hours)
• Radiance standard deviation during sky view averaged over (2510_2515 cm^-1)(skyViewStdDevRadiance2510_2515)
• Relative humidity measured near Blackbodies. Use with air temperature near BBs
  only.(atmosphericRelativeHumidity)
• AERI SW HBB 2min NESR Estimate #1 derived from variance during HBB view (Ch2)(HBB2minNENestimateNo1Ch2)
• Ambient air temperature at hatch opening(outsideAirTemp)
• AERI LW HBB 2min NESR Estimate #1 derived from variance during HBB view (Ch1)(HBB2minNENestimateNo1Ch1)

• Vertical FFT Bandwidth(vband)
• Pulse repetition frequency(prf)
• Spectral Data(spc_amp)
• Rx Bandwidth Switch Code(bswitch)
• North Latitude(lat)
• -180.0 - +180.0(alt)
• Ave Time per Average Spectra.(spcavetim)
• Individual Spectrum Integration Time(sitime)
• Height Index(range_gate)
• Number of Coherent Samples/Spectral Point(ncoh)
• Radial Velocity Spectral Resolution(vsr)
• Range gate spacing(rgs)
• base time in epoch(base_time)
• Height of Center of First Range Gate(rgf)
• Height of center of last range gate(rgl)
• Number of pulse code bits(pcbits)
• Interpulse period(ipp)
• Beam Elevation Angle(elevation)
• Beam Number(beam)
• Pulse length(plen)
• Particle radius at logarithmic center of bin(bins)
• Oblique FFT bandwidth(oband)
• Delay Time to 1st Gate(dly)
• Array of heights for each sample time(height_t)
• Time Domain Integration Time(tditime)
• Number of Individual Spectra/Average Spectrum(nspc)
• Number of Valid Heights(nheight)
• Time offset from base_time(time_offset)
• Sample Rate(sampr)
• lon(lon)

• Retrieved cloud liquid water content(liquidWaterContent)
• Expected root-mean-square error in liquid water path retrieval(liquidWaterPathRmsError)
• Surface water vapor density at instrument(surfaceWaterVaporDensity)
• Microwave brightness temperature(brightnessTemperature)
• Expected root-mean-square error in water vapor density retrieval(waterVaporDensityRmsError)
• Data quality flags(dataQualityFlags)
• Flag indicating moisture sensor status(wetWindowFlag)
• Surface pressure at instrument(surfacePressure)
• Zenith-pointing infrared temperature at 10um(infraredTemperature)
• Lifting condensation level pressure(liftingCondensationLevelPres)
• Temperature used for calculation(temperature)
• Retrieved liquid water path(liquidWaterPath)
• Height(height)
• Cloud base height used during retrieval(cloudBaseHeight)
• Ambient surface absolute temperature(surfaceTemperature)
• Beam Elevation Angle(elevation)
• lon(lon)
• Time offset from base_time(time_offset)
• Interpolated water vapor mixing ratio(waterVaporMixingRatio)
• Convective available potential energy(cape)
• time_in_seconds_since_volume_start(time)
• Derived pressure(pressure)
• Expected root-mean-square error in temperature retrieval(temperatureRmsError)
• Expected root-mean-square error in liquid water path retrieval using only 23.835
  and 30.0 GHz(liquidWaterPath2RmsError)
• Expected root-mean-square error in precipitable water retrieval using only
  23.835 and 30.0 GHz(totalPrecipitableWater2RmsError)
• Equilibrium level(equilibriumLevel)
• Interpolated dewpoint temperature(dewpointTemperature)
• Retrieved total precipitable water vapor using only 23.835 and 30.0 GHz(totalPrecipitableWater2)
• North Latitude(lat)
• base time in epoch(base_time)
• -180.0 - +180.0(alt)
• Expected root-mean-square error in precipitable water retrieval(totalPrecipitableWaterRmsError)
• Total precipitable water vapor, from microwave radiometer(totalPrecipitableWater)
• Internal blackbody reference temperature(blackbodyTemperature)
• Lifting condensation level(liftingCondensationLevel)
• Level of free convection(levelFreeConvection)
• Retrieved liquid water path using only 23.835 and 30.0 GHz(liquidWaterPath2)
• Ambient surface relative humidity(surfaceRelativeHumidity)
• Expected root-mean-square error in liquid water content retrieval(liquidWaterContentRmsError)
• Derived virtual temperature(virtualTemperature)
• Equilibrium level pressure(equilibriumLevelPres)
• Derived relative humidity(relativeHumidity)
• Retrieved water vapor density(waterVaporDensity)
• Level of free convection pressure(levelFreeConvectionPres)
• Azimuth of Radar Ray(azimuth)
• radiation_frequency(frequency)

• Background signal(background_signal)
• Instrument Temperature(instrument_temp)
• Preliminary cloud base height above ground level(preliminary_cbh)
• Voltage level which operates the A/D card and the detector(voltage_05)
• Voltage level which operates the thermistor(voltage_10)
• Voltage level which operates the energy monitor(voltage_15)
• Attenuated backscatter(detector_counts)
• -180.0 - +180.0(alt)
• North Latitude(lat)
• Distance to the center of the corresponding range bin(range)
• Repetition Rate, or Trigger Frequency of the laser(pulse_rep)
• Laser output energy per pulse(energy_monitor)
• Time in nanoseconds for each range bin of multichannel scalar card.(range_bin_time)
• time_in_seconds_since_volume_start(time)
• Filter Temperature(filter_temp)
• lon(lon)
• Distance from leading edge of first range bin to the center of each bin .(range_bins)
• Height(height)
• Number of lidar pulses summed(shots_summed)
• Maximum altitude retrieved from multichannel scalar card.(max_altitude)
• Width of range-bins calculated from range_bin_time(range_bin_width)
• Subtract from range_bins to yield range(range_offset)
• base time in epoch(base_time)
• Time offset from base_time(time_offset)
• Detector Temperature(detector_temp)
• Laser Temperature(laser_temp)

• Mean of radiance spectra ensemble(mean_rad)
• Time in decimal format at center of AERI sky observation period(Time_UTC_hours)
• AERI instrument unit serial number(AERIunitNumber)
• Scene mirror view angle in non-negative degrees, measured clockwise from nadir
  looking into interferometer window(sceneMirrorAngle)
• Difference between the sky view\'s radiance variance and the hot black body
  view\'s variance(standard_dev_mean_rad)
• Cold blackbody temperature used in calibration(calibrationCBBtemp)
• Observation latitude(Latitude)
• Version number of Operational Software(systemReleaseNumber)
• BB Support Structure Temperature(BBsupportStructureTemp)
• Observation altitude(Altitude)
• Hot blackbody temperature used in calibration(calibrationHBBtemp)
• Observation longitude(Longitude)
• Duration of scene view(sceneViewDuration)
• Logical flag indicating that a data record is missing (true/false)(missingDataFlag)
• Relative humidity measured near Blackbodies. Use with air temperature near BBs
  only.(atmosphericRelativeHumidity)
• time_in_seconds_since_volume_start(time)
• lon(lon)
• AERI instrument data channel number(channelNumber)
• Calibrated scene type identification(calibratedSceneID)
• Time offset from base_time(time_offset)
• base time in epoch(base_time)
• wavenumbers for mean radiance spectra(wnum)
• Wave number in reciprocal centimeters(wnum2)
• Observation date(dateYYMMDD)
• Maximum departure from ideal of the mirror position over the course of all
  contributing views. Typically two hot, two ambient, and one scene view are
  examine(sceneMirPosEncoderMaxDrift)
• Julian Day including day and fraction of day(JulianDay)
• -180.0 - +180.0(alt)
• North Latitude(lat)
• Ambient temperature used in calibration(calibrationAmbientTemp)
• Character string containing instrument name(instrumentUnitNumber)
• Ambient air temperature at hatch opening(outsideAirTemp)
• Time at center of AERI sky observation period(timeHHMMSS)
• Boolean with negative error conditions: 1:Open 0:Closed -1:Fault -2:Outside
  Valid Range -3:Neither Open Nor Closed(hatchOpen)
• Observation atmospheric pressure in AERI electronics(atmosphericPressure)

• Averaging interval(avgint)
• Number of values that passed consensus, virtual temperature(ncns_virtual_temp)
• Corrected Beam 0 Virtual Temperature(virtual_temp_corr)
• Beam 0 virtual temperature(virtual_temp)
• Range gate spacing(rgs)
• Sample Rate(sampr)
• Number of pulses/ave int, Beam 0(nrec)
• -180.0 - +180.0(alt)
• North Latitude(lat)
• Signal to Noise Ratio, Beam 0 Virtual Temperature(snr_virtual_temp)
• Number of Values that Passed Consensus, Vertical wind velocity(ncns_vert_v)
• Number of values that passed consensus, corrected virtual temperature(ncns_virtual_temp_corr)
• lon(lon)
• Time offset from base_time(time_offset)
• base time in epoch(base_time)
• Number of Values Required for Consensus, Beam 0(nrcns)
• Vertical wind velocity(vert_v)
• Signal to Noise Ratio, Vertical wind velocity(snr_vert_v)
• Signal to Noise Ratio, Corrected Beam 0 Virtual Temperature(snr_virtual_temp_corr)
• Height(height)

• Total liquid water along zenith path using tip-derived brightness temperatures(liqtip)
• Noise injection temp at 31.4 GHz adjusted to tkbb(tnd31)
• Noise injection temp at 23.8 GHz adjusted to tkbb(tnd23)
• Noise injection temp at 31.4 GHz derived from this tip(tnd31I)
• Blackbody kinetic temperature(tkbb)
• base time in epoch(base_time)
• Ambient temperature(tkair)
• 31.4 GHz sky signal(tipsky31)
• 23.8 GHz sky signal(tipsky23)
• Noise injection temp at nominal temperature at 23.8 GHz(tnd_nom23)
• Noise injection temp at nominal temperature at 31.4 GHz(tnd_nom31)
• Mixer kinetic (physical) temperature(tkxc)
• Water on Teflon window (1=WET, 0=DRY)(wet_window)
• Actual elevation angle(actel)
• 31.4 GHz blackbody(bb31)
• (tknd)
• 23.8 GHz Blackbody signal(bb23)
• Noise injection temp at 23.8 GHz derived from this tip(tnd23I)
• North Latitude(lat)
• -180.0 - +180.0(alt)
• Total water vapor along zenith path using tip-derived brightness temperatures(vaptip)
• Correlation coefficients for tip curve at 31.4 GHz(r31)
• 31.4 GHz blac2body+noise injection signal(bbn31)
• Time offset from base_time(time_offset)
• 23.8 GHz goodness-of-fit coefficient(r23)
• 23.8 GHz blackbody+noise injection signal(bbn23)
• Temperature correction coefficient at 31.4 GHz(tc31)
• Temperature correction coefficient at 23.8 GHz(tc23)
• Actual Azimuth(actaz)
• lon(lon)
• 23.8 GHz sky brightness temperature derived from tip curve(tbskytip23)
• 31.8 GHz sky brightness temperature derived from tip curve(tbskytip31)

• base time in epoch(base_time)
• Range gate spacing(rgs)
• Spectral Data(spc_amp)
• Time offset from base_time(time_offset)
• Sample Rate(sampr)
• North Latitude(lat)
• -180.0 - +180.0(alt)
• lon(lon)
• Particle radius at logarithmic center of bin(bins)
• Height(height)

• Characteristic value representing overall shortwave channel responsivity(SWresponsivity)
• Radiance standard deviation during sky view averaged over (985_990 cm^-1)(skyViewStdDevRadiance985_990)
• Decimal representation of percentage weighting of ambient blackbody apex
  temperature(ABBapexTempWeight)
• Interferometer Window Temperature(interferometerWindowTemp)
• Scene mirror temperature as measured at the center of the back of the mirror(sceneMirrorTemp)
• Optics Compartment Relative Humidity(opticsCompartmentRelativeHumidity)
• Weight factor for bottom used in calculating ambient blackbody temperature
  average(ABBbottomTempWeight)
• Boolean with negative error conditions: 1:Open 0:Closed -1:Fault -2:Outside
  Valid Range -3:Neither Open Nor Closed(hatchOpen)
• Logical flag indicating that a data record is missing (true/false)(missingDataFlag)
• ABB view radiance standard deviation (2510_2515 cm^-1)(ABBviewStdDevRadiance2510_2515)
• North Latitude(lat)
• Calibrated scene type identification(calibratedSceneID)
• -180.0 - +180.0(alt)
• Signal conditioning electronics inside air temperature(SCEtemp)
• Maximum departure from ideal of the mirror position over the course of all
  contributing views. Typically two hot, two ambient, and one scene view are
  examine(sceneMirPosEncoderMaxDrift)
• Stirling cycle cooler current(coolerCurrent)
• Maximum temperature difference between ABB thermistors(ABBmaxTempDiff)
• Imaginary radiance during sky view averaged over (985_990 cm-1)(skyViewImaginaryRadiance985_990)
• Scene mirror motor driver heat sink temperature(motorDriverTemp)
• HBB view radiance standard deviation (700_705 cm^-1)(HBBviewStdDevRadiance700_705)
• Time offset from base_time(time_offset)
• Sky view imaginary radiance (2282_2287 cm^-1)(skyViewImaginaryRadiance2282_2287)
• Spare temperature sensor (location TBD)(spareTemp)
• ABB View Radiance Std Deviation (2282_2287 cm^-1)(ABBviewStdDevRadiance2282_2287)
• HBB view radiance standard deviation (985_990 cm^-1)(HBBviewStdDevRadiance985_990)
• Rain sensor analog output(rainSensorIntensity)
• Julian Day including day and fraction of day(JulianDay)
• Scene mirror view angle in non-negative degrees, measured clockwise from nadir
  looking into interferometer window(sceneMirrorAngle)
• Radiance standard deviation during sky view averaged over (2510_2515 cm^-1)(skyViewStdDevRadiance2510_2515)
• Ambient blackbody temperature - apex(ABBapexTemp)
• Sun sensor intensity(sunSensorIntensity)
• The maximum excursion of hot-blackbody temperature over 5 consecutive scenes,
  centered on the scene view(HBBtempDrift)
• ABB View Radiance Std Deviation (675_680 cm^-1)(ABBviewStdDevRadiance675_680)
• Longwave elevated air brightness temperature from radiance average (700_705
  cm-1)(elevatedLayerAirTemp700_705)
• Longwave radiance average (700_705 cm^-1) elevated air(elevatedLayerRadiance700_705)
• Hot blackbody temperature - apex(HBBapexTemp)
• Front end fan air temperature difference(frontEndFanAirTempDiff)
• Ingest computer temperature(computerTemp)
• Shortwave radiance average (2295_2300 cm^-1) Surface Air(surfaceLayerRadiance2295_2300)
• Stirling cooler power supply temperature measured at power supply frame(coolerPowerSupplyTemp)
• Maximum temperature difference between HBB thermistors(HBBmaxTempDiff)
• Shortwave scene NEN limit(SWskyNENlimit)
• Shortwave window radiance average (2510_2515 cm^-1)(shortwaveWindowRadiance2510_2515)
• Character string containing instrument name(instrumentUnitNumber)
• Resistive temperature of 97 Kohm fixed resistor located in SCE-P4 shell(fixed97KohmResistor)
• Stirling cooler compressor temperature measured at compressor heatsink(coolerCompressorTemp)
• Longwave surface air brightness temperature from radiance average (675_680 cm-1)(surfaceLayerAirTemp675_680)
• Radiance standard deviation during sky view averaged over (2282_2287 cm-1)(skyViewStdDevRadiance2282_2287)
• Hot blackbody temperature - rim top(HBBtopTemp)
• Sky View Imaginary Radiance (675_680 cm^-1)(skyViewImaginaryRadiance675_680)
• Instrument scene mirror position identifier(sceneMirrorPosition)
• Radiance standard deviation during sky view averaged over (2295_2300 cm^-1)(skyViewStdDevRadiance2295_2300)
• HBB view radiance standard deviation (2282_2287 cm^-1)(HBBviewStdDevRadiance2282_2287)
• Shortwave window brightness temperature from radiance average (2510_2515 cm-1)(shortwaveWindowAirTemp2510_2515)
• Maximum Standard Deviation in Thermistor Channels 0..7(maxSampleStdDev)
• Motor step value given to motor controller to achieve proper mirror positioning(sceneMirrorMotorStep)
• Shortwave radiance average (2282_2287 cm^-1) elevated air(elevatedLayerRadiance2282_2287)
• Scene mirror motor case temperature(mirrorMotorTemp)
• Longwave window brightness temperature from radiance average (985_990 cm^-1)(longwaveWindowAirTemp985_990)
• Shortwave surface air brightness temperature from radiance average (2295_2300
  cm-1)(surfaceLayerAirTemp2295_2300)
• Decimal representation of percentage weighting of hot blackbody apex temperature(HBBapexTempWeight)
• Expanded Spectral Buffer Size(expandedInterferogramSize)
• Relative humidity measured near Blackbodies. Use with air temperature near BBs
  only.(atmosphericRelativeHumidity)
• AERI interferometer temperature at second port(interferometerSecondPortTemp)
• Radiance standard deviation during sky view averaged over (675_680 cm-1)(skyViewStdDevRadiance675_680)
• Shortwave elevated air brightness temperature from radiance average (2282_2287
  cm-1)(elevatedLayerAirTemp2282_2287)
• Weight factor for top used in calculating hot blackbody temperature average(HBBtopTempWeight)
• Ambient air temperature near the interferometer(airNearInterferometerTemp)
• HBB view radiance standard deviation (675_680 cm^-1)(HBBviewStdDevRadiance675_680)
• Electronics rack ambient temperature(rackAmbientTemp)
• Corrective offset for final ambient blackbody average temperature(ABBtempOffset)
• Resistive temperature of 2500 ohm fixed resistor - banana plug mounted(fixed2500ohmResistor)
• Observation latitude(Latitude)
• The noise equivalent radiance observed in the longwave channel during a sky view
  at 1000 cm-1(LWskyNEN)
• Blackbody controller unit 2 power supply temperature(BBcontroller2temp)
• Ambient blackbody temperature(ABBbottomTemp)
• HBB view radiance standard deviation (2510_2515 cm^-1)(HBBviewStdDevRadiance2510_2515)
• Stirling cycle cooler expander temperature(coolerExpanderTemp)
• Corrective offset for final hot blackbody average temperature(HBBtempOffset)
• Number of complete (forward+backward) interferogram scans in sample average(coadditionsCount)
• Radiance standard deviation during ambient blackbody view averaged over (985_990
  cm-1)(ABBviewStdDevRadiance985_990)
• Ambient blackbody temperature - rim top(ABBtopTemp)
• Detector Temperature(detectorTemp)
• base time in epoch(base_time)
• Difference between actual and ideal motor encoder values for current view
  indicative of quality of the mirror positioning.(sceneMirPosEncoderDrift)
• Observation atmospheric pressure in AERI electronics(atmosphericPressure)
• Scene mirror position count; number of viewers in a sequence(sceneMirPosCount)
• Number of terms in FFOV corrections(numberOfTerms)
• Blackbody cavity geometry factor(BBcavityFactor)
• AERI instrument data channel number(channelNumber)
• HBB View Radiance Std Deviation (2295_2300 cm^-1)(HBBviewStdDevRadiance2295_2300)
• Interferometer Enclosure Relative Humidity(interferometerEnclosureRelativeHumidity)
• Logical flag indicating whether HBB temperature is stable (true) or not stable
  (false). Determined using HBBtempDrift and HBBtempDriftLimit.(HBBstable)
• Longwave HBB noise-equivalent radiance(LW_HBB_NEN)
• FFOV half angle(FFOVhalfAngle)
• Laser wavenumber used in definition of output wavenumber scale(outputLaserWavenumber)
• Observation longitude(Longitude)
• Logical flag indicating whether shortwave channel noise equivalent radiance is
  acceptable in sky view (true/false). Determined using SWskyNEN and
  SWskyNENlimit.(SWskyNENacceptable)
• time_in_seconds_since_volume_start(time)
• Two minute noise estimate factor(twoMinuteNoiseEstimateFactor)
• Observation date(dateYYMMDD)
• Size of buffer holding initial spectrum(originalInterferogramSize)
• Weight factor for bottom used in calculating hot blackbody temperature average(HBBbottomTempWeight)
• Logical flag indicating whether any data is available at current time
  (true/false)(dataAvailable)
• Blackbody controller unit 1 power supply temperature(BBcontroller1temp)
• Duration of scene view(sceneViewDuration)
• Front End Fan Airflow Heated Temperature(frontEndFanAirHeatedTemp)
• Sky View Imaginary Radiance (700_705 cm^-1)(skyViewImaginaryRadiance700_705)
• Ambient air temperature near blackbodies(airNearBBsTemp)
• Original Laser Wavenumber(originalLaserWavenumber)
• Cold blackbody temperature used in calibration(calibrationCBBtemp)
• Characteristic value representing overall longwave channel responsivity(LWresponsivity)
• ABB view radiance standard deviation (700_705 cm^-1)(ABBviewStdDevRadiance700_705)
• Imaginary radiance during sky view averaged over (2510_2515 cm-1)(skyViewImaginaryRadiance2510_2515)
• Longwave radiance average (675-680 cm-1) Surface Air(surfaceLayerRadiance675_680)
• ABB View Radiance Std Deviation (2295_2300 cm^-1)(ABBviewStdDevRadiance2295_2300)
• Hot blackbody temperature used in calibration(calibrationHBBtemp)
• Logical flag indicating whether longwave channel noise equivalent radiance is
  acceptable in sky view (true/false). Determined using LWskyNEN and
  LWskyNENlimit.(LWskyNENacceptable)
• Radiance standard deviation during sky view averaged over (700_705 cm-1)(skyViewStdDevRadiance700_705)
• Ambient air temperature at hatch opening(outsideAirTemp)
• lon(lon)
• Shortwave HBB Noise-equivalent Radiance(SW_HBB_NEN)
• Scene mirror position encoder value(sceneMirPosEncoder)
• Limit in Hot-blackbody Temperature Drift(HBBtempDriftLimit)
• Observation altitude(Altitude)
• BB Support Structure Temperature(BBsupportStructureTemp)
• Time in decimal format at center of AERI sky observation period(Time_UTC_hours)
• AERI instrument unit serial number(AERIunitNumber)
• Ambient temperature used in calibration(calibrationAmbientTemp)
• Sky View Imaginary Radiance (2295_2300 cm^-1)(skyViewImaginaryRadiance2295_2300)
• The noise equivalent radiance observed in the shortwave channel during a sky
  view at 2500 cm^-1(SWskyNEN)
• Version number of Operational Software(systemReleaseNumber)
• Time at center of AERI sky observation period(timeHHMMSS)
• Weight factor for top used in calculating ambient blackbody temperature average(ABBtopTempWeight)
• Front End Fan Airflow Unheated Temperature(frontEndFanAirUnheatedTemp)
• Longwave scene NEN limit(LWskyNENlimit)
• Resistive temperature of 12 Kohm fixed resistor located in SCE-P3 shell(fixed12KohmResistor)
• Hot blackbody temperature - rim bottom(HBBbottomTemp)
• Longwave window radiance average (985_990 cm^-1)(longwaveWindowRadiance985_990)

• null(JPEG data stream - documentation not yet available)

• 1000 * log10(noise signal level)(noise)
• Spectral Width: vert velocity(specw)
• North Latitude(lat)
• -180.0 - +180.0(alt)
• Time offset from base_time(time_offset)
• base time in epoch(base_time)
• Beam 0 virtual temperature(virtual_temp)
• lon(lon)
• Acoustic Spectral Width(sspecw)
• Signal to Noise Ratio: acoustic(ssnr)
• Signal-to-noise-ratio(snr)
• Mean atmospheric vertical velocity(mdf)
• Height(height)
• Sample Rate(sampr)
• Range gate spacing(rgs)
• Mean Sound Speed(smdf)

• Second lowest cloud base height(second_cbh)
• Degrees from vertical (-15 to +90)(tilt_angle)
• lon(lon)
• Warning, alarm, and internal status information(status_string)
• Percentage of nominal factory setting (0 to 999%)(receiver_sensitivity)
• Window contamination(window_contamination)
• Percentage of nominal factory setting (0 to 999%)(laser_pulse_energy)
• Third cloud base height(third_cbh)
• Aerosol volume backscattering coefficient at 355 nm(backscatter)
• Sum of detected and normalized backscatter(sum_backscatter)
• Flag indicating aeri retrieval status(status_flag)
• 6 character string describing instrument measurement parameters(measurement_parameters)
• Raw data filename(filename)
• Laser temperature(laser_temperature)
• Altitude of highest signal(alt_highest_signal)
• Millivolts at internal ADC input (0 to 2500)(background_light)
• Distance to the center of the corresponding range bin(range)
• Time offset from base_time(time_offset)
• Detection status.(detection_status)
• base time in epoch(base_time)
• Lowest cloud base height detected(first_cbh)
• Vertical visibility(vertical_visibility)
• North Latitude(lat)
• -180.0 - +180.0(alt)

• Interpulse period(ipp)
• Vertical FFT Bandwidth(vband)
• Number of pulses/ave int, Beam 0(nrec0)
• Number of spectra per averaging interval, beam 1(nrec1)
• Number of Spectra/ave int, Beam 4(nrec4)
• Number of spectra/ave int, Beam 2(nrec2)
• Number of spectra/ave int, Beam 3(nrec3)
• Oblique Velocity Spectral Resolution(ovsr)
• Height of Center of First Range Gate(rgf)
• Height of center of last range gate(rgl)
• Number of Individual Spectra/Average Spectrum(nspc)
• V wind component(v_wind)
• Range gate spacing(rgs)
• Individual Spectrum Integration Time(sitime)
• North Latitude(lat)
• -180.0 - +180.0(alt)
• Array of heights for each sample time(height_p)
• Time Domain Integration Time(tditime)
• Elevation angle of beam 0(elevation0)
• Elevation angle of beam 4(elevation4)
• Elevation angle of beam 3(elevation3)
• Elevation angle of Beam 2 for WINDS data(elevation2)
• Elevation angle of beam 1(elevation1)
• Pulse length(plen)
• Pulse repetition frequency(prf)
• Number of Valid Heights(nheight)
• Power offset(power)
• Azimuth of Beam 3 for WINDS data(azimuth3)
• Azimuth of Beam 2(azimuth2)
• Azimuth of Beam 1 for WINDS data(azimuth1)
• Azimuth of Beam 0(azimuth0)
• Azimuth of beam 4(azimuth4)
• Beam 0 radial wind speed(vel0)
• Beam 2 radial wind speed(vel2)
• Beam 1 radial wind speed(vel1)
• Beam 4 radial wind speed(vel4)
• Beam 3 radial wind speed(vel3)
• Vertical Velocity Spectral Resolution(vvsr)
• Easterly Wind Component(u_wind)
• lon(lon)
• Height Index(range_gate)
• Number of pulse code bits(pcbits)
• Time offset from base_time(time_offset)
• Oblique FFT bandwidth(oband)
• Rx Bandwidth Switch Code(bswitch)
• Number of Coherent Samples/Spectral Point(ncoh)
• Horizontal wind direction(dir)
• Delay Time to 1st Gate(dly)
• Horizontal wind speed(spd)
• Averaging interval(avgint)
• Number of Values Required for Consensus, Beam 3(nrcns3)
• Number of Values Required for Consensus, Beam 2(nrcns2)
• Number of Values Required for Consensus, Beam 1(nrcns1)
• Number of values required for consensus, beam 0(nrcns0)
• Number of values required for consensus, beam 4(nrcns4)
• Number of values that passed consensus, beam 1(ncns1)
• Number of values that passed consensus, beam 0(ncns0)
• Number of values that passed consensus, beam 4(ncns4)
• Number of values that passed consensus, beam 3(ncns3)
• Number of values that passed consensus, beam 2(ncns2)
• base time in epoch(base_time)
• Ave Time per Average Spectra.(spcavetim)
• Signal to Noise Ratio, Beam 3(snr3)
• Signal to noise ratio, beam 4(snr4)
• Signal to Noise Ratio, Beam 0(snr0)
• Ave snr*10 level, Beam 1(snr1)
• Signal to noise ratio, beam 2(snr2)
• Sample Rate(sampr)

• Background signal(background_signal)
• Deadtime correction factor(deadtime_correction)
• Number of lidar pulses summed(shots_summed)
• Distance from leading edge of first range bin to the center of each bin .(range_bins)
• lon(lon)
• Height(height)
• Instrument Temperature(instrument_temp)
• Aerosol volume backscattering coefficient at 355 nm(backscatter)
• value represents earliest applicable date as yyyymmdd(property)
• Amount of time laser pulse lags behind the scalar trigger(laser_scalar_sync_offset)
• Laser Temperature(laser_temp)
• Laser output energy per pulse(energy_monitor)
• Maximum altitude retrieved from multichannel scalar card.(max_altitude)
• Subtract from range_bins to yield range(range_offset)
• North Latitude(lat)
• -180.0 - +180.0(alt)
• Amount of time the scalar lags behind the sync trigger(scalar_sync_offset)
• Amount of time the actual laser pulse lags behind the sync trigger(laser_sync_offset)
• time_in_seconds_since_volume_start(time)
• Filter Temperature(filter_temp)
• Distance to the center of the corresponding range bin(range)
• Repetition rate, or Trigger Frequency of the laser(trigger_freq)
• base time in epoch(base_time)
• Detector Temperature(detector_temp)
• Preliminary cloud base height above ground level(preliminary_cbh)
• Angle of orientation with respect to true geographic north(transceiver_azimuth_angle)
• Width of range-bins calculated from range_bin_time(range_bin_width)
• Time offset from base_time(time_offset)
• Number of laser pulses summed during measurement interval(shots_sum)
• Time in nanoseconds for each range bin of multichannel scalar card.(range_bin_time)
• Sum of raw backscatter counts per bin prior to ANY corrections.(total_counts)
• Repetition Rate, or Trigger Frequency of the laser(pulse_rep)
• Angle of inclination with respect to horizontal(transceiver_altitude_angle)
• Voltage level which operates the thermistor(voltage_10)
• Voltage level which operates the energy monitor(voltage_15)
• Voltage level which operates the A/D card and the detector(voltage_05)