Description: | DATA REPROCESSED and CORRECTED:
To produce a continuous estimate of clear-sky shortwave irradiance in climates that
infrequently have clear-sky conditions a single set of clear-sky coefficients are calculated
for the entire run rather than a series of daily coefficients. GRW is such a site, but it
was not processed using this technique originally. The impact affects variables that use
these coefficients in their calculations.
The Radflux1long .c2 level datastream was reprocessed to generate the correct coefficients
in March 2017. Please retrieve the reprocessed data for use in your analysis.
List of variables that have changed:
clearsky_diffuse_downwelling_shortwave
clearsky_direct_downwelling_shortwave
clearsky_downwelling_longwave
clearsky_downwelling_shortwave
clearsky_emissivity_longwave
clearsky_status
clearsky_upwelling_longwave
clearsky_upwelling_shortwave
cloud_radiating_temperature
cloud_transmissivity_shortwave
cloudfraction_longwave
cloudfraction_shortwave
cloudfraction_shortwave_status
diffuse_downwelling_shortwave
direct_downwelling_shortwave
downwelling_shortwave
ice_cloud_temperature_limit
rh_adjustment_to_clearsky_emissivity_longwave
tau_asymmetry_parameter_status
tau_temperature_limit_status
visible_cloud_optical_depth
qc_air_temperature
qc_diffuse_downwelling_shortwave
qc_direct_downwelling_shortwave
qc_downwelling_shortwave
qc_precipitation
qc_pressure
qc_wind_direction
qc_wind_speed
ORIGINAL DQR CATEGORY: Red( Incorrect)
REPROCESSED and CORRECTED DATA ARCHIVED:2017-03
REPROCESS IDENTIFICATION NUMBER: RID 1529
---------------------------------------------------
--- ORIGINAL DQR DESCRIPTION ---
---------------------------------------------------
To produce a continuous estimate of clear-sky shortwave irradiance in climates that
infrequently have clear-sky conditions a single set of clear-sky coefficients are calculated
for the entire run rather than a series of daily coefficients. GRW is such a site, but it
was not processed using this technique. The impact is to all primary measurement values
as they are calculated using the coefficients calculated by the fit method used. |