Subject: | TWP/SMET/C1 - Reprocess: Miscalibrated windspeed2 data |
DataStreams: | twpsmet60sC1.a1, twpsmet60sC1.b1
|
Description: | A replacement anemometer (WSP2) was installed but the new anemometer calibration
coefficients were not put into the logger. The multiplication factor was 0.09708 when it should
have been 0.09763 (very small difference)the offset was 0.36 when it should have been 0.3
(a difference 0.06 m/s). |
Suggestions: | To correct the data over this from WSPD2 subtract 0.06 m/s and multiply by 1.0057. |
Measurements: | twpsmet60sC1.b1: - wind2_spd_max_gust
- wind2_spd_max
- wind2_spd_min
- wind2_spd_arith_avg
more
twpsmet60sC1.a1: - wind2_spd_min
- wind2_spd_arith_avg
- wind2_spd_max
- wind2_spd_max_gust
more
|